Symptom:		Won't turn on / no display.
Probable Cause:		Poor connection at front cover flex cable to main board.
Cure:		Polish flex cable contact area with a clean pencil eraser. Remove all eraser residue.

FAQ Index Page | Land Mobile Radios

[ICOM Homepage] [Dealers] [New Radios] [Calendar] [Specials] [Get In Touch With ICOM ]

©1997 ICOM America, Inc. The ICOM logo is a registered trademark of ICOM, Inc. All ICOM radios significantly exceed FCC regulations limiting spurious emissions. All stated specifications are subject to change without notice or obligation.